Custom heat exchangers, end-to-end.
Every cooler we build starts with your boundary conditions and ends with commissioned hardware on site. Below are the seven application areas we serve. Each one is a starting point — bring us your specification and a thermal engineer will reply within 48 hours.
Motor & Generator Cooling
Air-water and air-air coolers for AC variable-frequency motors, hydro generators, and large industrial drives in metallurgy, mining, rolling mills, and pulp & paper.
- — Up to 70,000 kW motor capacity
- — 6 kV / 11 kV winding voltages
- — Elliptical-tube design (10,000+ wind turbines)
- — IP55/IP65 enclosure options
- — Siemens Energy
- — TMEIC
- — Shanghai Electric
- — Wolong
Wind Turbine Cooling
Generator and converter coolers for onshore and offshore wind turbines. Salt-spray-resistant variants for marine deployment.
- — Up to 9 MW per unit
- — Onshore C3 / offshore C5-M corrosion class
- — Patented elliptical-tube geometry on 10,000+ machines
- — Shanghai Electric
- — Goldwind / CFNE
- — GE Renewable
Wind Tunnel Thermal Systems
Aerospace-grade heat exchangers for aerodynamic and automotive wind tunnels — tight uniformity and pressure-loss budgets.
- — First Chinese-domestic supplier (broke import dependency)
- — Custom flow conditioning
- — Subsonic to transonic envelopes
- — Porsche AG
- — Tongji University
- — Tsinghua University
- — AVIC
Gas Turbine Inlet Air Cooling
Inlet-air chilling and heating coils for gas turbine power plants. Recovers 5–10% of nameplate power lost to high ambient.
- — Direct expansion, chilled water, and evaporative options
- — Output boost of 20%+
- — Compatible with GE, Siemens, MHI frames
- — Saudi Arabia turnkey deployment (2007)
Industrial Process Cooling
Air-cooled and shell-and-tube heat exchangers for petrochemical, chemical, power, and process plant duties.
- — ACC and AFC configurations
- — API 661-compatible designs
- — Shell-and-tube to TEMA/ASME standards
- — BASF
- — Sinopec
- — Wanhua
- — Linde
Waste Heat Recovery
Turnkey waste heat recovery systems integrating heat exchangers, water systems, and controls. Flue gas, wastewater, and equipment heat.
- — 80°C to 1,200°C applicable range
- — Turnkey integration (HX + water + controls)
- — Three recovery modes
- — Voith
- — Multiple steel and chemical plants
Retrofit & Replacement
Drop-in replacement coolers for installed Siemens, GE, ABB, TMEIC, and other OEM motors and turbines. Performance-uplift retrofits.
- — Reverse-engineered fits for legacy hardware
- — OEM cross-reference for common bases
- — On-site dimensional verification
- — Multiple power-plant retrofit projects in MEA and SEA
Bring us a problem we haven't seen.
Custom-spec heat exchangers are our default mode. A thermal engineer will reply within 48 hours.
Talk to a thermal engineer →